Hot Products
FC200 Series COMPACT LOW COS...
Model : FC200 Series
The FC200 Series frequency and voltage converters are economically priced and offer top of the line performance.
The series consists of two 1 phase output instruments in size of 500VA and 1000VA. The converters allow the user to duplicate a utility grid of either 50, 60 or 400 Hertz for export product testing or operation of imported equipment.
5VP Series HIGH POWER PROGRA...
Model : 5VP Series
The 5VP Series consists of high power load cabinet systems with support for 60V, 600V or 1000V input ranges.
All loads share a common and intuitive user interface. The 5VP Series are highly efficient integrated DC load systems that operate from a single user control panel or remote control interface.
High Voltage Cable Test Solu...
Model : W 484
Especially for the testing of high voltage cable harnesses and components for electric and hybrid vehicles, WEETECH has developed the new W 484 Test System. It meets the requirements of the industry standard LV 123*. The high voltage source with voltages up to 4,300 Vdc / 3,000 Vac is current limited to a maximum of 3.8 mA and considered as safe to touch according to DIN EN 50191.
Three-Phase flicker impedanc...
Model : AIF 503N-series
＊Impedances values as per IEC/EN 61000-3-3 & IEC/EN 61000-3-11
＊Non-saturable air coil inductors
＊Line voltage 3 x 400V
＊Line current up to 75A per phase (depending on model)
＊Automatic overcurrent protection
＊Status indication by LED
＊Remote-controlled by DPA 503N
Calibration Target and verif...
Model : CTR2/CTR2-AD
＊Current target as per IEC/EN 61000-4-2
＊2Ohm impedance +/- 5%
＊Test voltage up to 30kV
＊Insertion loss +/- 0.5dB up to 1GHz
＊Insertion loss +/- 1.2dB up to 4GHz
＊............
Surge/Telecom Surge Generato...
Model : VCS 500N7T
＊Surge voltage up to 7 kV
＊Surge current up to 3.5 kA
＊Telecom surge voltage up to 7 kV
＊Telecom surge current up to 465 A
＊Voltage/current monitors
＊Built-in 1ph CDN 16 A
＊.........
Load Dump Generator with Cli...
Model : LD 200N
＊Load Dump generator according to ISO 7637, ISO 16750-2, SAE J1113, SAE J1455, JASO, Nissan and most car manufacturer requirements
＊Generates Clipped Load Dump pulses
＊Built-in 0.5 - 38 Ohm source impedance, selectable in 0.1 Ohm steps
＊Pulse duration up to 1,200ms
＊.......
Digital Power analyzer for h...
Model : DPA 500N
＊Real-time data acquisition
＊Internal hard disk for data storage
＊16-Bit A/D converter
＊Wide-range current input
＊Wide-range voltage input
＊Built-in lumped flicker impedance
＊..........
Electrical Fast Transient Ge...
Model : EFT 500N5
＊10,000 pulses/sec.
＊4.8kV Burst voltage
＊Spike frequency up to 1MHz
＊Built-in 1ph or 3ph coupler up to 50A
＊Pulse verification acc. to Ed.3 on each coupling path
＊.........
8kV Combination Wave Simulat...
Model : VCS 500N8
＊Surge voltage up to 8kV
＊Surge current up to 4kA
＊Voltage/current monitors
＊Built-in CDN 1-phase or 3-phase up to 3 x 690V and 32A
＊Interlock
＊Warning lamp control
＊.........
Load Dump Generator with Cli...
Model : LD 200N100
＊Load Dump generator according to ISO 7637, ISO 16750-2, SAE J1113, SAE J1455, JASO, Nissan and most car manufacturer requirements
＊Built-in 100A couppler 60 V/100 A
＊Built-in battery switch for 100A
＊Generates Clipped Load Dump pulses
＊Pulse duration up to 1,200ms
＊.......
3-Phase Digital Power Analyz...
Model : DPA 503N
＊Real-time data acquisition
＊Internal hard disk for data storage
＊16-Bit A/D converter
＊6 input channels
＊Wide-range current input up to 140Arms
＊Wide-range voltage input up to 530Vrms
＊..........