High Voltage Cable Test Solutions W 484

The tester for high voltage components for the e-mobility industry

Especially for the testing of high voltage cable harnesses and components for electric and hybrid vehicles, WEETECH has developed the new W 484 Test System. It meets the requirements of the industry standard LV 123*. The high voltage source with voltages up to 4,300 Vdc / 3,000 Vac is current limited to a maximum of 3.8 mA and considered as safe to touch according to DIN EN 50191.

With the compact W 484 Test System, continuity measurements in the µOhm range as well as insulation measurements in the GOhm range are possible. Three integrated innovative detectors react fast reliable on insulation failures. Optionally, adapter cables equipped with ID chips can be connected to any output connector on the system.

Ideal for high voltage testing in the automotive industry

• LV 123 compliant testing with voltages up to 4,300 Vdc / 3,000 Vac
• Various test point modules for voltages up to 2,700 Vdc / 1,900 Vac or up to 4,300 Vdc / 3,000 Vac available
• Maximum of 264 (W 484-1), 528 (W 484-2) or 792 test points (W 484-3)
• Robust Harting Han 46 EE output connector

Safe testing without risk

• Non-hazardous voltages according to DIN EN 50191 due to current limitation to 3.8 mA
• Ethernet interface with opto-decoupling of the control PC
• Integrated HV-SAFETY for safe disconnection of the high voltage source via EMERGENCY STOP, SAFETY or HV-ENABLE

Optimal integration into the test environment

• Compact 19-inch housing in 3 different sizes
• Small footprint for optimum space efficiency
• Retractable handles for easy transportation
• Optionally available with rollers and/or crane eyelets
• Hides into the adaptation table to save space

Comprehensive technical equipment for flexible use also in other areas

• Highly sensitive ARC detection withPower modules for switching of voltages up to 60 Vdc / 25 Vac, currents up to 3 A
  • Step detector (voltage change)
  • Slew detector (edge steepness)
  • Programmable dIdt detector
• Optional ID chips for random connection of the adapter cables to any output connector
  • No time-consuming assignment of connectors
  • No mistakes due to incorrect connections

·         LV 123* compliant test system with voltages up to 4,300 Vdc / 3,000 Vac

·         Non-hazardous voltages according to DIN EN 50191 due to current limitation to 3.8 mA

·         Compact 19-inch housing in 3 different sizes

·         Tests of high voltage cable harnesses and connectors for electric and hybrid vehicles

·         Tests of charging cables and charging plugs

·         Tests of disconnectors and high voltage contactors