Combination Wave (Surge) and Telecom Surge Generator up to 10kV

Combined combination wave / Telecom surge generator

Surge pulses occur due to direct or indirect lightning strokes to an external (outdoor) circuit. This leads to currents or electromagnetic fields causing high voltage or current transients. Another source for surge pulses are switching transients originating from switching disturbances and systems faults.

Due to the characteristic of the phenomenon nearly every electrical and electronical device may suffer from such lightning events which justifies the necessity of surge tests being widely performed. Surge voltage can reach several thousands of volts and surge current is seen to reach several thousands of amps.

• Combination Wave up to 10kV/5kA
• Telecom surge voltage up to 10kV
• Telecom surge current up to 666A
• Repetition rate 60s @10kV Surge
• Built-in coupling for telecom port testing
• USB (optical link) and GPIB interface
• Interlock
• Warning lamp control
• Manual operation
• Voltage/current monitors

Benefits

VCS 500N10T - Compact surge / Telecom surge generator with built-in coupling for telecom ports

The VCS 500N10T unifies the test capabilities for Combination wave surge and telecom surge testing in one unit up to 10kV. Moreover it offers built-in coupling resistors for telecom port testing.

For combination wave surge tests on high-current mains supply lines its capability can be extended by an external CDN to achieve nominal currents of 100A and more per phase.

By selecting the desired coupling the source impedance and the coupling capacitor is set automatically what ever CDN is connected.

Fail inputs are offered as standard for DUT monitoring purposes. Peak values of voltage and current are shown in the display and these values are transferred to the software for reporting.

To comply with safety regulations the VCS 500N10T is equipped with a contact to control warning lamps and with a safety interlock.

Pre-programmed Standard Test routines allow highest user convenience. Still the VCS 500N10T offers the Quick Start test routine where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT.

Operation
Easy to operate

Front panel menu and function keys enable the user to program his test routines quickly and accurately. The cursor allows fast control of all test parameters of the programmed routine, thus test procedures are simplified and confidence is generated that every step is carried out correctly.

Software
iec.control Software for control and documentation

Outstanding user convenience, clearly structured windows and operation features and the EM TEST standards library along with the flexibility to generate user specific test sequences very easily are the main features of iec.control software. The software is automatically configured according to the connected EM TEST generators. Extensive reporting capabilities help the user to create test reports that meet international requirements.

iec.control is supported by Windows 2000, Windows XP, Windows Vista and Windows 7. Remote control is achieved either via USB or GPIB. iec.control supports a wide range of GPIB cards of National Instruments.

Auxiliary Devices
CNV 503 - 3phase coupling/decoupling networks for surge

EM TEST offers a range of fully automatic 3phase coupling/decoupling networks for surge to extend the test capability for three-phase DUTs. The networks have a rated current of up to 100A.

CNI 503 - 3phase coupling/decoupling networks for burst and surge

EM TEST offers a range of fully automatic 3phase coupling/decoupling networks for burst and surge to extend the test capability for three-phase DUTs. The networks have a rated current of up to 100A.

CNV 504N/508N - Coupling networks for signal/data lines

CNV 504N/508N coupling/decoupling networks are available to perform surge and ringwave tests on I/O lines and signal/data lines as per IEC/EN 61000-4-5 and IEC/EN 61000-4-12.

CNV 504S/508S - Coupling networks for Telecom lines

The coupling networds CNV504S/508S are specifically designed for surge/telecom surge tests on telecom lines as per IEC/EN 61000-4-5.

Accessories
MS 100N - Magnetic field coil

By means of the MS 100N magnetic field coil of EM TEST pulsed magnetic fields as per IEC 61000-4-9 and related standards can be generated.