Model : CFS300 Series
The CFS300 Series three phase programmable AC or DC output power sources are cost effective sources of power for development, test and production applications requiring from 3000VA or less to 6000VA of three phase AC or DC output.
This series consists of two models, CFS330 and CFS360. All models share a modern PWM switch mode design for optimal performance and efficiency. These units are excellent source for 50, 60 or 400 Hertz for export product testing as well as testing DC powered equipment.
For questions regarding the CFS300 Series, please contact us.
The CSF300 Series programmable AC and DC output power sources are easy to use instruments which provide precisely controlled frequency and voltage conversion for three phase, split phase or single phase AC development and test. The frequency can be adjusted from 40 to 500 Hertz for applications such as the testing of three phase powered military/avionics equipment or for the operation of 400 Hertz electronics that are onboard an aircraft or a military vessel. The adjustable frequency band in conjunction with the dual voltage ranges of 0-150 volt or 0-300 volt as well as DC test capability provides full capabilities for testing and operating electronics deployed worldwide.
Setup and operation of the CFS300 Series is easy. The large LCD display and simple front panel controls allows users to vary voltage and frequency using the shuttle or by entering a value directly using the decimal keypad. The LCD displays readouts for frequency, voltage, current, peak current, crest factor, power, apparent power and power factor.
The CFS300 Series power sources are a reliable and cost effective solutions for all of your single phase AC power and DC power needs!
Three phase, split phase or single phase output
Current and Power Limit Protection
Intuitive Front Panel Operation
Measurement readouts for Frequency, Voltage, Current, Peak Current, Current Crest Factor, Power, Apparent Power and Power Factor all at once
Low Voltage Distortion
High Crest Factor and Peak Current Capability
Up to 0-300 VAC L-N / 520V L-L Direct Coupled Out
Up to 420VDC output
40-1000 Hz Full Power Bandwidth
USB & RS232 Interfaces Standard
The CFS300 Series Power Sources are equipped with a powerful microcontroller to create a stable and accurate output, regardless of AC input line conditions. It can be programmed to supply a variety of AC or DC power conditions to the device under test and meters all output parameters.
The CFS300 Series is an excellent source of stable AC voltage over a frequency range of 40 to 1000 Hz. The output frequency is quartz-crystal stabilized. Output voltages up to 300 VAC are provided.
Export/Import Product Development and Test
With the ability to provide any single, split or three phase voltage and frequency combination found around the world, the CFS100 Series is a great choice for evaluating AC power input supplies for worldwide use.
The CFS300 Series includes a DC output mode that allows for development or testing of DC powered products up to 420 Vdc. Current and power limit are available in DC mode as well.
Whenever 400Hz, 115Vac single phase is required to power up shipboard or airborne equipment, the CFS300 can do the job. With up to 55.2 A of current available (Model CFS360), most AC equipment can be powered up for repair or test purposes.