The AFX Series consists of a range of High Power Switching AC, DC and AC+DC capable Power Sources covering a power range from 9 kVA to 60 kVA. All AFX models offer single, split and three phase output configurations. The AFX is a state-of-the-art design using the latest digital power conversion technologies. Power density is among the highest in the industry allowing 15 kVA/kW of power in only 4U (7″) of rack space.
Great emphasis has been placed on energy efficiency, ease of installation, and maximum power per cubic inch of rack space. Control and operational features provide a high degree of application versatility and ease of use for the test engineer. Applications range from simple, manually controlled frequency conversion to harmonic immunity testing and sophisticated transient simulation.
Power conversion within the AFX Series is achieved by digitally controlled, high frequency pulse width modulation, resulting in cool, quiet and efficient operation.
DC, 15 to 1,200 Hz. Full Power
AC, DC, AC+DC, DC+AC
Phase Output Modes:
Single (1), Split (2) and Three Phase (3)
AC Voltage Range:
0 – 300 Vrms L-N / 0-520 Vrms L-L Constant Power Mode
DC Voltage Range:
0 – 425 Vdc Constant Power Mode
All AFX models are designed for operation in 19 inch equipment racks. Models above 15 kVA require parallel operating of one AFX Master unit and one or more auxiliary no-controller (NC) units. Models 3300AFX through 3600AFX are available as cabinet systems with all internal input and output wiring, terminal blocks and parallel connections included.
Standard 19 inch rack. Slide rails are available as an option for all AFX units.
See model table above for panel or cabinet height.
Approximately 25 inch, from the front panel to the rear of the chassis.
Front forced air intake with rear exhaust. Automatic Fan Speed Control for low acoustic noise and extended fan life. The available energy saving sleep modes of the AFX result in low power consumption during idle periods and extend the life of the product.
Expanding the AC Power Source into an Automated Test System
Pacific’s line of Smartsource® AC Power Sources enable engineers to easily automate their testing by using industry standard software development environments. The AFX series offers standard Ethernet/LAN connectivity, a browser interface, LXI compliance (LAN extensions for Instruments) to ensure inter operability with other LXI instruments and IVI (Interchangeable Virtual Instrument) driver to speed up ATE test program development.
AC Output, DC Output, AC+DC Output
DC, 15 to 1,200 Hz Frequency Range
Single, Constant Power mode 300V L-N/520V L-L/425Vdc voltage range offers wider operating range
Precision True-RMS metering of Volts, Amps, Power, VA, Power Factor and Crest Factor
Compatible with UPC Studio graphical user interface
1, 2 or 3 Phase Switch Selectable Output from front panel or bus command
Sine, Square, Triangle, THD and Arbitrary waveforms
Available in 208-240V or 380-480V 3 Phase AC input with Active PFC
99 stored programs for both static and dynamic Transient Testing
Continuous Self Calibration (CSC)
Precision Voltage Programming – 0.02% with CSC engaged in AC and DC modes
Power Levels from 9 kVA to 60 kVA
Standard RS-232, USB and Ethernet Interface with SCPI compatibility
LXI Compliant LAN/Ethernet with embedded web server
IVI Instruments drivers
CE (EMC/Safety) and Nemko (Safety) Marks
Design Provides Total Control of AC and DC Power
All AFX Series power source models are equipped with a digitally Programmable Controller.
Total control of the output power mode, phase mode (form) is available from the front panel or the bus.
All operating functions may be controlled from either the front panel or from a remote RS-232, USB or LAN interface. IVI Compliant Instrument Drivers are available.
Special AFX Series Operating Features
Continuous Self Calibration
Provides for exceptional accuracy of the AC output Voltage. When enabled, accuracy improves to ±0.1% referenced to the power source internal voltmeter.
Single Voltage Range with Constant Power Operation
More output current available at lower voltage setting without having to change range.
Up to 16 different waveforms can be stored in the waveform library for execution as part of a steady state program or for substitution in any output phase as part of a transient test program. Memory location #1 is a non-editable high resolution sine wave. Locations 2-22 are editable and can be substituted in any output phase. An unlimited number of waveforms may be stored on the computer for those using a programmable UPC.
Time Based Transients
Create and execute transients that occur over a specified time segment to modify the output waveform, voltage, and frequency for any or all phases. An output trigger is provided for synchronizing external test equipment to the actual transient event.
Cycle Based Transients
Create and execute transients that substitute a waveform in any or all phases for 1 to 100 cycles. The waveform being substituted can be selected and/or modified from the waveform library.
The AFX Series Power Source is equipped with several powerful Digital Signal Processors to create a fully integrated test system. It supplies a variety of power conditions to the device under test and meters all output performance parameters.
AC+DC Test Power
Special test requirements such the application of a DC offset on an AC line or AC ripple on a DC supply output are supported by selecting the AC+DC Mode of operation.
The AFX Series is an excellent source of stable AC voltage over the frequency range of 15 to 1,200 Hz. The output frequency is accurate to 0.01%.
With the ability to provide singe, split and three-phase outputs, the AFX Series is the perfect choice to provide 1 Phase to 2 or 3 Phase or 3 Phase to 1 Phase conversion.
The AFX Series controller offers both manual and full programmable control. Front panel operation is menu driven using a combination of direct access menu keys to the left of the large color display and 5 soft keys located on the right of the display. The rotary knob can be used to scroll through menu fields and doubles as an ENTER key. The same knob allows for slewing of output parameters. A full decimal keypad is provided as well for direct parameter entry. The AFX can also be operated remotely from one of its included remote interfaces. Operation from a web browser via LAN or USB is also supported through the embedded web server of the AFX.
Protective Transit Cases for Mobile Applications
Pacific Power Source offers rugged transit cases to protect your AC Source from adverse environmental conditions for mobile and/or military applications.
Environmental Protection (shock, vibration, moisture, heat),
Unrestricted Equipment Operation,
Quick Cover Removal & Installation,
Integrated wheels and Handles,
Stainless Steel Latches.
Available for following AFX models:
5U: 390AFX, 3120AFX, 3150ASX